SL-1 Series Standard-output Injector from LINCOLN

Series SL-1

Specifications:

Model	Number of outlets	Dimensions
	Number of outlets	A		B
		in.	mm	in.	mm
83749-1	1	Single mounting hole		2-1/2	63
83749-2	2	Single mounting hole		3	76
83749-3	3	1-1/4	32	4-1/4	108
83749-4	4	2-1/2	63	5-1/2	140
83749-5	5	3-3/4	95	6-3/4	171
83748		Replacement for manifold injectors
Note: Injector manifolds have 13/32 in. (10.3mm) diameter mounting holes for 3/8 in. bolt. Injectors have flouroelastomer packings. Check compatibility with synthetic lubricants. Injectors rated for 350°F (176°C)max. ambient temperature, depending on lubricant used. Output with adjustment screw hand-tightened is .009 cu. in. Maximum output is achieved with eight turns at .009 cu. in./ turn.

Item	Description	Qty
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18	Injector body Adjusting screw Lock nut Packing housing Grease nipple with cap Copper gasket Adapter bolt 3/8" NPT adapter Copper gasket Inlet valve Viton O-ring typle L Displacement piston Compression spring Plunger Viton packing type L Viton packing type L Viton packing type L Stell washer	1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1
Note: * repair parts can be order
Note: # seal parts can be changed when broken